FM / PCSC

/usr/include/PCSC

Name	Size	Mode	Actions
debuglog.h	2924	0644	edit dl rm
ifdhandler.h	5827	0644	edit dl rm
pcsclite.h	9004	0644	edit dl rm
reader.h	12546	0644	edit dl rm
winscard.h	2969	0644	edit dl rm
wintypes.h	1210	0644	edit dl rm

Edit: /usr/include/PCSC/pcsclite.h (9004B)

/*
 * MUSCLE SmartCard Development ( http://www.linuxnet.com )
 *
 * Copyright (C) 1999-2004
 *  David Corcoran <corcoran@linuxnet.com>
 *  Ludovic Rousseau <ludovic.rousseau@free.fr>
 *
 * $Id: pcsclite.h.in 3111 2008-09-05 08:12:11Z rousseau $
 */

/**
 * @file
 * @brief This keeps a list of defines for pcsc-lite.
 */

#ifndef __pcsclite_h__
#define __pcsclite_h__

#include <wintypes.h>

#ifdef __cplusplus
extern "C"
{
#endif

#ifdef WIN32
#include <winscard.h>
#else
typedef long SCARDCONTEXT; /**< \p hContext returned by SCardEstablishContext() */
typedef SCARDCONTEXT *PSCARDCONTEXT;
typedef SCARDCONTEXT *LPSCARDCONTEXT;
typedef long SCARDHANDLE; /**< \p hCard returned by SCardConnect() */
typedef SCARDHANDLE *PSCARDHANDLE;
typedef SCARDHANDLE *LPSCARDHANDLE;

#define MAX_ATR_SIZE			33	/**< Maximum ATR size */

typedef struct
{
	const char *szReader;
	void *pvUserData;
	unsigned long dwCurrentState;
	unsigned long dwEventState;
	unsigned long cbAtr;
	unsigned char rgbAtr[MAX_ATR_SIZE];
}
SCARD_READERSTATE_A;

typedef SCARD_READERSTATE_A SCARD_READERSTATE, *PSCARD_READERSTATE_A,
	*LPSCARD_READERSTATE_A;

/** Protocol Control Information (PCI) */
typedef struct
{
	unsigned long dwProtocol;	/**< Protocol identifier */
	unsigned long cbPciLength;	/**< Protocol Control Inf Length */
}
SCARD_IO_REQUEST, *PSCARD_IO_REQUEST, *LPSCARD_IO_REQUEST;

typedef const SCARD_IO_REQUEST *LPCSCARD_IO_REQUEST;

extern SCARD_IO_REQUEST g_rgSCardT0Pci, g_rgSCardT1Pci,
	g_rgSCardRawPci;

#define SCARD_PCI_T0	(&g_rgSCardT0Pci) /**< protocol control information (PCI) for T=0 */
#define SCARD_PCI_T1	(&g_rgSCardT1Pci) /**< protocol control information (PCI) for T=1 */
#define SCARD_PCI_RAW	(&g_rgSCardRawPci) /**< protocol control information (PCI) for RAW protocol */

#define SCARD_S_SUCCESS			0x00000000 /**< No error was encountered. */
#define SCARD_F_INTERNAL_ERROR		0x80100001 /**< An internal consistency check failed. */
#define SCARD_E_CANCELLED		0x80100002 /**< The action was cancelled by an SCardCancel request. */
#define SCARD_E_INVALID_HANDLE		0x80100003 /**< The supplied handle was invalid. */
#define SCARD_E_INVALID_PARAMETER	0x80100004 /**< One or more of the supplied parameters could not be properly interpreted. */
#define SCARD_E_INVALID_TARGET		0x80100005 /**< Registry startup information is missing or invalid. */
#define SCARD_E_NO_MEMORY		0x80100006 /**< Not enough memory available to complete this command. */
#define SCARD_F_WAITED_TOO_LONG		0x80100007 /**< An internal consistency timer has expired. */
#define SCARD_E_INSUFFICIENT_BUFFER	0x80100008 /**< The data buffer to receive returned data is too small for the returned data. */
#define SCARD_E_UNKNOWN_READER		0x80100009 /**< The specified reader name is not recognized. */
#define SCARD_E_TIMEOUT			0x8010000A /**< The user-specified timeout value has expired. */
#define SCARD_E_SHARING_VIOLATION	0x8010000B /**< The smart card cannot be accessed because of other connections outstanding. */
#define SCARD_E_NO_SMARTCARD		0x8010000C /**< The operation requires a Smart Card, but no Smart Card is currently in the device. */
#define SCARD_E_UNKNOWN_CARD		0x8010000D /**< The specified smart card name is not recognized. */
#define SCARD_E_CANT_DISPOSE		0x8010000E /**< The system could not dispose of the media in the requested manner. */
#define SCARD_E_PROTO_MISMATCH		0x8010000F /**< The requested protocols are incompatible with the protocol currently in use with the smart card. */
#define SCARD_E_NOT_READY		0x80100010 /**< The reader or smart card is not ready to accept commands. */
#define SCARD_E_INVALID_VALUE		0x80100011 /**< One or more of the supplied parameters values could not be properly interpreted. */
#define SCARD_E_SYSTEM_CANCELLED	0x80100012 /**< The action was cancelled by the system, presumably to log off or shut down. */
#define SCARD_F_COMM_ERROR		0x80100013 /**< An internal communications error has been detected. */
#define SCARD_F_UNKNOWN_ERROR		0x80100014 /**< An internal error has been detected, but the source is unknown. */
#define SCARD_E_INVALID_ATR		0x80100015 /**< An ATR obtained from the registry is not a valid ATR string. */
#define SCARD_E_NOT_TRANSACTED		0x80100016 /**< An attempt was made to end a non-existent transaction. */
#define SCARD_E_READER_UNAVAILABLE	0x80100017 /**< The specified reader is not currently available for use. */

#define SCARD_W_UNSUPPORTED_CARD	0x80100065 /**< The reader cannot communicate with the card, due to ATR string configuration conflicts. */
#define SCARD_W_UNRESPONSIVE_CARD	0x80100066 /**< The smart card is not responding to a reset. */
#define SCARD_W_UNPOWERED_CARD		0x80100067 /**< Power has been removed from the smart card, so that further communication is not possible. */
#define SCARD_W_RESET_CARD		0x80100068 /**< The smart card has been reset, so any shared state information is invalid. */
#define SCARD_W_REMOVED_CARD		0x80100069 /**< The smart card has been removed, so further communication is not possible. */

#define SCARD_E_PCI_TOO_SMALL		0x80100019 /**< The PCI Receive buffer was too small. */
#define SCARD_E_READER_UNSUPPORTED	0x8010001A /**< The reader driver does not meet minimal requirements for support. */
#define SCARD_E_DUPLICATE_READER	0x8010001B /**< The reader driver did not produce a unique reader name. */
#define SCARD_E_CARD_UNSUPPORTED	0x8010001C /**< The smart card does not meet minimal requirements for support. */
#define SCARD_E_NO_SERVICE		0x8010001D /**< The Smart card resource manager is not running. */
#define SCARD_E_SERVICE_STOPPED		0x8010001E /**< The Smart card resource manager has shut down. */
#define SCARD_E_NO_READERS_AVAILABLE    0x8010002E /**< Cannot find a smart card reader. */

#define SCARD_AUTOALLOCATE (DWORD)(-1)	/**< see SCardFreeMemory() */
#define SCARD_SCOPE_USER		0x0000	/**< Scope in user space */
#define SCARD_SCOPE_TERMINAL		0x0001	/**< Scope in terminal */
#define SCARD_SCOPE_SYSTEM		0x0002	/**< Scope in system */

#define SCARD_PROTOCOL_UNDEFINED	0x0000	/**< protocol not set */
#define SCARD_PROTOCOL_UNSET SCARD_PROTOCOL_UNDEFINED	/* backward compat */
#define SCARD_PROTOCOL_T0		0x0001	/**< T=0 active protocol. */
#define SCARD_PROTOCOL_T1		0x0002	/**< T=1 active protocol. */
#define SCARD_PROTOCOL_RAW		0x0004	/**< Raw active protocol. */
#define SCARD_PROTOCOL_T15		0x0008	/**< T=15 protocol. */

#define SCARD_PROTOCOL_ANY		(SCARD_PROTOCOL_T0|SCARD_PROTOCOL_T1)	/**< IFD determines prot. */

#define SCARD_SHARE_EXCLUSIVE		0x0001	/**< Exclusive mode only */
#define SCARD_SHARE_SHARED		0x0002	/**< Shared mode only */
#define SCARD_SHARE_DIRECT		0x0003	/**< Raw mode only */

#define SCARD_LEAVE_CARD		0x0000	/**< Do nothing on close */
#define SCARD_RESET_CARD		0x0001	/**< Reset on close */
#define SCARD_UNPOWER_CARD		0x0002	/**< Power down on close */
#define SCARD_EJECT_CARD		0x0003	/**< Eject on close */

#define SCARD_UNKNOWN			0x0001	/**< Unknown state */
#define SCARD_ABSENT			0x0002	/**< Card is absent */
#define SCARD_PRESENT			0x0004	/**< Card is present */
#define SCARD_SWALLOWED			0x0008	/**< Card not powered */
#define SCARD_POWERED			0x0010	/**< Card is powered */
#define SCARD_NEGOTIABLE		0x0020	/**< Ready for PTS */
#define SCARD_SPECIFIC			0x0040	/**< PTS has been set */

#define SCARD_STATE_UNAWARE		0x0000	/**< App wants status */
#define SCARD_STATE_IGNORE		0x0001	/**< Ignore this reader */
#define SCARD_STATE_CHANGED		0x0002	/**< State has changed */
#define SCARD_STATE_UNKNOWN		0x0004	/**< Reader unknown */
#define SCARD_STATE_UNAVAILABLE		0x0008	/**< Status unavailable */
#define SCARD_STATE_EMPTY		0x0010	/**< Card removed */
#define SCARD_STATE_PRESENT		0x0020	/**< Card inserted */
#define SCARD_STATE_ATRMATCH		0x0040	/**< ATR matches card */
#define SCARD_STATE_EXCLUSIVE		0x0080	/**< Exclusive Mode */
#define SCARD_STATE_INUSE		0x0100	/**< Shared Mode */
#define SCARD_STATE_MUTE		0x0200	/**< Unresponsive card */
#define SCARD_STATE_UNPOWERED		0x0400	/**< Unpowered card */

#endif

/** PC/SC Lite specific extensions */
#define SCARD_W_INSERTED_CARD		0x8010006A
#define SCARD_E_UNSUPPORTED_FEATURE	0x8010001F /**< feature not supported. */

#ifndef INFINITE
#define INFINITE			0xFFFFFFFF	/**< Infinite timeout */
#endif

#define PCSCLITE_VERSION_NUMBER		"1.5.2"	/**< Current version */
/** Maximum readers context (a slot is count as a reader) */
#define PCSCLITE_MAX_READERS_CONTEXTS			16

#define MAX_READERNAME			100

#ifndef SCARD_ATR_LENGTH
#define SCARD_ATR_LENGTH		MAX_ATR_SIZE	/**< Maximum ATR size */
#endif

/*
 * The message and buffer sizes must be multiples of 16.
 * The max message size must be at least large enough
 * to accomodate the transmit_struct
 */
#define MAX_BUFFER_SIZE			264	/**< Maximum Tx/Rx Buffer for short APDU */
#define MAX_BUFFER_SIZE_EXTENDED	(4 + 3 + (1<<16) + 3)	/**< enhanced (64K + APDU + Lc + Le) Tx/Rx Buffer */

/*
 * Gets a stringified error response
 */
char *pcsc_stringify_error(const long);

#ifdef __cplusplus
}
#endif

#endif

cmd: