/usr/lib/python2.6/site-packages
Edit: /usr/lib/python2.6/site-packages/pytz-2010h-py2.6.egg-info (22577B)
Metadata-Version: 1.0
Name: pytz
Version: 2010h
Summary: World timezone definitions, modern and historical
Home-page: http://pytz.sourceforge.net
Author: Stuart Bishop
Author-email: stuart@stuartbishop.net
License: MIT
Download-URL: http://pypi.python.org/pypi/pytz
Description: pytz - World Timezone Definitions for Python
============================================
:Author: Stuart Bishop
Introduction
~~~~~~~~~~~~
pytz brings the Olson tz database into Python. This library allows
accurate and cross platform timezone calculations using Python 2.3
or higher. It also solves the issue of ambiguous times at the end
of daylight savings, which you can read more about in the Python
Library Reference (``datetime.tzinfo``).
Amost all of the Olson timezones are supported.
Note that this library differs from the documented Python API for
tzinfo implementations; if you want to create local wallclock
times you need to use the ``localize()`` method documented in this
document. In addition, if you perform date arithmetic on local
times that cross DST boundaries, the results may be in an incorrect
timezone (ie. subtract 1 minute from 2002-10-27 1:00 EST and you get
2002-10-27 0:59 EST instead of the correct 2002-10-27 1:59 EDT). A
``normalize()`` method is provided to correct this. Unfortunatly these
issues cannot be resolved without modifying the Python datetime
implementation.
Installation
~~~~~~~~~~~~
This package can either be installed from a .egg file using setuptools,
or from the tarball using the standard Python distutils.
If you are installing from a tarball, run the following command as an
administrative user::
python setup.py install
If you are installing using setuptools, you don't even need to download
anything as the latest version will be downloaded for you
from the Python package index::
easy_install --upgrade pytz
If you already have the .egg file, you can use that too::
easy_install pytz-2008g-py2.6.egg
Example & Usage
~~~~~~~~~~~~~~~
Localized times and date arithmetic
-----------------------------------
>>> from datetime import datetime, timedelta
>>> from pytz import timezone
>>> import pytz
>>> utc = pytz.utc
>>> utc.zone
'UTC'
>>> eastern = timezone('US/Eastern')
>>> eastern.zone
'US/Eastern'
>>> amsterdam = timezone('Europe/Amsterdam')
>>> fmt = '%Y-%m-%d %H:%M:%S %Z%z'
This library only supports two ways of building a localized time. The
first is to use the ``localize()`` method provided by the pytz library.
This is used to localize a naive datetime (datetime with no timezone
information):
>>> loc_dt = eastern.localize(datetime(2002, 10, 27, 6, 0, 0))
>>> print loc_dt.strftime(fmt)
2002-10-27 06:00:00 EST-0500
The second way of building a localized time is by converting an existing
localized time using the standard ``astimezone()`` method:
>>> ams_dt = loc_dt.astimezone(amsterdam)
>>> ams_dt.strftime(fmt)
'2002-10-27 12:00:00 CET+0100'
Unfortunately using the tzinfo argument of the standard datetime
constructors ''does not work'' with pytz for many timezones.
>>> datetime(2002, 10, 27, 12, 0, 0, tzinfo=amsterdam).strftime(fmt)
'2002-10-27 12:00:00 AMT+0020'
It is safe for timezones without daylight savings trasitions though, such
as UTC:
>>> datetime(2002, 10, 27, 12, 0, 0, tzinfo=pytz.utc).strftime(fmt)
'2002-10-27 12:00:00 UTC+0000'
The preferred way of dealing with times is to always work in UTC,
converting to localtime only when generating output to be read
by humans.
>>> utc_dt = datetime(2002, 10, 27, 6, 0, 0, tzinfo=utc)
>>> loc_dt = utc_dt.astimezone(eastern)
>>> loc_dt.strftime(fmt)
'2002-10-27 01:00:00 EST-0500'
This library also allows you to do date arithmetic using local
times, although it is more complicated than working in UTC as you
need to use the ``normalize()`` method to handle daylight savings time
and other timezone transitions. In this example, ``loc_dt`` is set
to the instant when daylight savings time ends in the US/Eastern
timezone.
>>> before = loc_dt - timedelta(minutes=10)
>>> before.strftime(fmt)
'2002-10-27 00:50:00 EST-0500'
>>> eastern.normalize(before).strftime(fmt)
'2002-10-27 01:50:00 EDT-0400'
>>> after = eastern.normalize(before + timedelta(minutes=20))
>>> after.strftime(fmt)
'2002-10-27 01:10:00 EST-0500'
Creating localtimes is also tricky, and the reason why working with
local times is not recommended. Unfortunately, you cannot just pass
a ``tzinfo`` argument when constructing a datetime (see the next
section for more details)
>>> dt = datetime(2002, 10, 27, 1, 30, 0)
>>> dt1 = eastern.localize(dt, is_dst=True)
>>> dt1.strftime(fmt)
'2002-10-27 01:30:00 EDT-0400'
>>> dt2 = eastern.localize(dt, is_dst=False)
>>> dt2.strftime(fmt)
'2002-10-27 01:30:00 EST-0500'
Converting between timezones also needs special attention. This also
needs to use the ``normalize()`` method to ensure the conversion is
correct.
>>> utc_dt = utc.localize(datetime.utcfromtimestamp(1143408899))
>>> utc_dt.strftime(fmt)
'2006-03-26 21:34:59 UTC+0000'
>>> au_tz = timezone('Australia/Sydney')
>>> au_dt = au_tz.normalize(utc_dt.astimezone(au_tz))
>>> au_dt.strftime(fmt)
'2006-03-27 08:34:59 EST+1100'
>>> utc_dt2 = utc.normalize(au_dt.astimezone(utc))
>>> utc_dt2.strftime(fmt)
'2006-03-26 21:34:59 UTC+0000'
You can take shortcuts when dealing with the UTC side of timezone
conversions. ``normalize()`` and ``localize()`` are not really
necessary when there are no daylight savings time transitions to
deal with.
>>> utc_dt = datetime.utcfromtimestamp(1143408899).replace(tzinfo=utc)
>>> utc_dt.strftime(fmt)
'2006-03-26 21:34:59 UTC+0000'
>>> au_tz = timezone('Australia/Sydney')
>>> au_dt = au_tz.normalize(utc_dt.astimezone(au_tz))
>>> au_dt.strftime(fmt)
'2006-03-27 08:34:59 EST+1100'
>>> utc_dt2 = au_dt.astimezone(utc)
>>> utc_dt2.strftime(fmt)
'2006-03-26 21:34:59 UTC+0000'
``tzinfo`` API
--------------
The ``tzinfo`` instances returned by the ``timezone()`` function have
been extended to cope with ambiguous times by adding an ``is_dst``
parameter to the ``utcoffset()``, ``dst()`` && ``tzname()`` methods.
>>> tz = timezone('America/St_Johns')
>>> normal = datetime(2009, 9, 1)
>>> ambiguous = datetime(2009, 10, 31, 23, 30)
the ``is_dst`` parameter is ignormed for most timestamps, but
is used to resolve the ambiguity during ambiguous periods caused
to DST transitions.
>>> tz.utcoffset(normal, is_dst=True)
datetime.timedelta(-1, 77400)
>>> tz.dst(normal, is_dst=True)
datetime.timedelta(0, 3600)
>>> tz.tzname(normal, is_dst=True)
'NDT'
>>> tz.utcoffset(ambiguous, is_dst=True)
datetime.timedelta(-1, 77400)
>>> tz.dst(ambiguous, is_dst=True)
datetime.timedelta(0, 3600)
>>> tz.tzname(ambiguous, is_dst=True)
'NDT'
>>> tz.utcoffset(normal, is_dst=False)
datetime.timedelta(-1, 77400)
>>> tz.dst(normal, is_dst=False)
datetime.timedelta(0, 3600)
>>> tz.tzname(normal, is_dst=False)
'NDT'
>>> tz.utcoffset(ambiguous, is_dst=False)
datetime.timedelta(-1, 73800)
>>> tz.dst(ambiguous, is_dst=False)
datetime.timedelta(0)
>>> tz.tzname(ambiguous, is_dst=False)
'NST'
If ``is_dst`` is not specified, ambiguous timestamps will raise
an ``AmbiguousTimeError`` exception.
>>> tz.utcoffset(normal)
datetime.timedelta(-1, 77400)
>>> tz.dst(normal)
datetime.timedelta(0, 3600)
>>> tz.tzname(normal)
'NDT'
>>> tz.utcoffset(ambiguous)
Traceback (most recent call last):
[...]
AmbiguousTimeError: 2009-10-31 23:30:00
>>> tz.dst(ambiguous)
Traceback (most recent call last):
[...]
AmbiguousTimeError: 2009-10-31 23:30:00
>>> tz.tzname(ambiguous)
Traceback (most recent call last):
[...]
AmbiguousTimeError: 2009-10-31 23:30:00
Problems with Localtime
~~~~~~~~~~~~~~~~~~~~~~~
The major problem we have to deal with is that certain datetimes
may occur twice in a year. For example, in the US/Eastern timezone
on the last Sunday morning in October, the following sequence
happens:
- 01:00 EDT occurs
- 1 hour later, instead of 2:00am the clock is turned back 1 hour
and 01:00 happens again (this time 01:00 EST)
In fact, every instant between 01:00 and 02:00 occurs twice. This means
that if you try and create a time in the 'US/Eastern' timezone using
the standard datetime syntax, there is no way to specify if you meant
before of after the end-of-daylight-savings-time transition.
>>> loc_dt = datetime(2002, 10, 27, 1, 30, 00, tzinfo=eastern)
>>> loc_dt.strftime(fmt)
'2002-10-27 01:30:00 EST-0500'
As you can see, the system has chosen one for you and there is a 50%
chance of it being out by one hour. For some applications, this does
not matter. However, if you are trying to schedule meetings with people
in different timezones or analyze log files it is not acceptable.
The best and simplest solution is to stick with using UTC. The pytz
package encourages using UTC for internal timezone representation by
including a special UTC implementation based on the standard Python
reference implementation in the Python documentation. This timezone
unpickles to be the same instance, and pickles to a relatively small
size. The UTC implementation can be obtained as pytz.utc, pytz.UTC,
or pytz.timezone('UTC').
>>> import pickle, pytz
>>> dt = datetime(2005, 3, 1, 14, 13, 21, tzinfo=utc)
>>> naive = dt.replace(tzinfo=None)
>>> p = pickle.dumps(dt, 1)
>>> naive_p = pickle.dumps(naive, 1)
>>> len(p), len(naive_p), len(p) - len(naive_p)
(60, 43, 17)
>>> new = pickle.loads(p)
>>> new == dt
True
>>> new is dt
False
>>> new.tzinfo is dt.tzinfo
True
>>> pytz.utc is pytz.UTC is pytz.timezone('UTC')
True
Note that this instance is not the same instance (or implementation) as
other timezones with the same meaning (GMT, Greenwich, Universal, etc.).
>>> utc is pytz.timezone('GMT')
False
If you insist on working with local times, this library provides a
facility for constructing them unambiguously:
>>> loc_dt = datetime(2002, 10, 27, 1, 30, 00)
>>> est_dt = eastern.localize(loc_dt, is_dst=True)
>>> edt_dt = eastern.localize(loc_dt, is_dst=False)
>>> print est_dt.strftime(fmt), '/', edt_dt.strftime(fmt)
2002-10-27 01:30:00 EDT-0400 / 2002-10-27 01:30:00 EST-0500
If you pass None as the is_dst flag to localize(), pytz will refuse to
guess and raise exceptions if you try to build ambiguous or non-existent
times.
For example, 1:30am on 27th Oct 2002 happened twice in the US/Eastern
timezone when the clocks where put back at the end of Daylight Savings
Time:
>>> eastern.localize(datetime(2002, 10, 27, 1, 30, 00), is_dst=None)
Traceback (most recent call last):
...
AmbiguousTimeError: 2002-10-27 01:30:00
Similarly, 2:30am on 7th April 2002 never happened at all in the
US/Eastern timezone, as the clocks where put forward at 2:00am skipping
the entire hour:
>>> eastern.localize(datetime(2002, 4, 7, 2, 30, 00), is_dst=None)
Traceback (most recent call last):
...
NonExistentTimeError: 2002-04-07 02:30:00
Both of these exceptions share a common base class to make error handling
easier:
>>> isinstance(pytz.AmbiguousTimeError(), pytz.InvalidTimeError)
True
>>> isinstance(pytz.NonExistentTimeError(), pytz.InvalidTimeError)
True
Although ``localize()`` handles many cases, it is still not possible
to handle all. In cases where countries change their timezone definitions,
cases like the end-of-daylight-savings-time occur with no way of resolving
the ambiguity. For example, in 1915 Warsaw switched from Warsaw time to
Central European time. So at the stroke of midnight on August 5th 1915
the clocks were wound back 24 minutes creating an ambiguous time period
that cannot be specified without referring to the timezone abbreviation
or the actual UTC offset. In this case midnight happened twice, neither
time during a daylight savings time period:
>>> warsaw = pytz.timezone('Europe/Warsaw')
>>> loc_dt1 = warsaw.localize(datetime(1915, 8, 4, 23, 59, 59), is_dst=False)
>>> loc_dt1.strftime(fmt)
'1915-08-04 23:59:59 WMT+0124'
>>> loc_dt2 = warsaw.localize(datetime(1915, 8, 5, 00, 00, 00), is_dst=False)
>>> loc_dt2.strftime(fmt)
'1915-08-05 00:00:00 CET+0100'
>>> str(loc_dt2 - loc_dt1)
'0:24:01'
The only way of creating a time during the missing 24 minutes is
converting from another timezone - because neither of the timezones
involved where in daylight savings mode the API simply provides no way
to express it:
>>> utc_dt = datetime(1915, 8, 4, 22, 36, tzinfo=pytz.utc)
>>> utc_dt.astimezone(warsaw).strftime(fmt)
'1915-08-04 23:36:00 CET+0100'
The standard Python way of handling all these ambiguities is not to
handle them, such as demonstrated in this example using the US/Eastern
timezone definition from the Python documentation (Note that this
implementation only works for dates between 1987 and 2006 - it is
included for tests only!):
>>> from pytz.reference import Eastern # pytz.reference only for tests
>>> dt = datetime(2002, 10, 27, 0, 30, tzinfo=Eastern)
>>> str(dt)
'2002-10-27 00:30:00-04:00'
>>> str(dt + timedelta(hours=1))
'2002-10-27 01:30:00-05:00'
>>> str(dt + timedelta(hours=2))
'2002-10-27 02:30:00-05:00'
>>> str(dt + timedelta(hours=3))
'2002-10-27 03:30:00-05:00'
Notice the first two results? At first glance you might think they are
correct, but taking the UTC offset into account you find that they are
actually two hours appart instead of the 1 hour we asked for.
>>> from pytz.reference import UTC # pytz.reference only for tests
>>> str(dt.astimezone(UTC))
'2002-10-27 04:30:00+00:00'
>>> str((dt + timedelta(hours=1)).astimezone(UTC))
'2002-10-27 06:30:00+00:00'
Country Information
~~~~~~~~~~~~~~~~~~~
A mechanism is provided to access the timezones commonly in use
for a particular country, looked up using the ISO 3166 country code.
It returns a list of strings that can be used to retrieve the relevant
tzinfo instance using ``pytz.timezone()``:
>>> pytz.country_timezones['nz']
['Pacific/Auckland', 'Pacific/Chatham']
The Olson database comes with a ISO 3166 country code to English country
name mapping that pytz exposes as a dictionary:
>>> pytz.country_names['nz']
'New Zealand'
What is UTC
~~~~~~~~~~~
'UTC' is Universal Time, also known as Greenwich Mean Time or GMT
in the United Kingdom. All other timezones are given as offsets from
UTC. No daylight savings time occurs in UTC, making it a useful timezone
to perform date arithmetic without worrying about the confusion and
ambiguities caused by daylight savings time transitions, your country
changing its timezone, or mobile computers that move roam through
multiple timezones.
Helpers
~~~~~~~
There are two lists of timezones provided.
``all_timezones`` is the exhaustive list of the timezone names that can
be used.
>>> from pytz import all_timezones
>>> len(all_timezones) >= 500
True
>>> 'Etc/Greenwich' in all_timezones
True
``common_timezones`` is a list of useful, current timezones. It doesn't
contain deprecated zones or historical zones, except for a few I've
deemed in common usage, such as US/Eastern (open a bug report if you
think other timezones are deserving of being included here). It is also
a sequence of strings.
>>> from pytz import common_timezones
>>> len(common_timezones) < len(all_timezones)
True
>>> 'Etc/Greenwich' in common_timezones
False
>>> 'Australia/Melbourne' in common_timezones
True
>>> 'US/Eastern' in common_timezones
True
>>> 'Canada/Eastern' in common_timezones
True
>>> 'US/Pacific-New' in all_timezones
True
>>> 'US/Pacific-New' in common_timezones
False
Both ``common_timezones`` and ``all_timezones`` are alphabetically
sorted:
>>> common_timezones_dupe = common_timezones[:]
>>> common_timezones_dupe.sort()
>>> common_timezones == common_timezones_dupe
True
>>> all_timezones_dupe = all_timezones[:]
>>> all_timezones_dupe.sort()
>>> all_timezones == all_timezones_dupe
True
``all_timezones`` and ``common_timezones`` are also available as sets.
>>> from pytz import all_timezones_set, common_timezones_set
>>> 'US/Eastern' in all_timezones_set
True
>>> 'US/Eastern' in common_timezones_set
True
>>> 'Australia/Victoria' in common_timezones_set
False
You can also retrieve lists of timezones used by particular countries
using the ``country_timezones()`` function. It requires an ISO-3166
two letter country code.
>>> from pytz import country_timezones
>>> country_timezones('ch')
['Europe/Zurich']
>>> country_timezones('CH')
['Europe/Zurich']
License
~~~~~~~
MIT license.
This code is also available as part of Zope 3 under the Zope Public
License, Version 2.1 (ZPL).
I'm happy to relicense this code if necessary for inclusion in other
open source projects.
Latest Versions
~~~~~~~~~~~~~~~
This package will be updated after releases of the Olson timezone
database. The latest version can be downloaded from the `Python Package
Index `_. The code that is used
to generate this distribution is hosted on launchpad.net and available
using the `Bazaar version control system `_
using::
bzr branch lp:pytz
Bugs, Feature Requests & Patches
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Bugs can be reported using `Launchpad `_.
Issues & Limitations
~~~~~~~~~~~~~~~~~~~~
- Offsets from UTC are rounded to the nearest whole minute, so timezones
such as Europe/Amsterdam pre 1937 will be up to 30 seconds out. This
is a limitation of the Python datetime library.
- If you think a timezone definition is incorrect, I probably can't fix
it. pytz is a direct translation of the Olson timezone database, and
changes to the timezone definitions need to be made to this source.
If you find errors they should be reported to the time zone mailing
list, linked from http://www.twinsun.com/tz/tz-link.htm
Further Reading
~~~~~~~~~~~~~~~
More info than you want to know about timezones:
http://www.twinsun.com/tz/tz-link.htm
Contact
~~~~~~~
Stuart Bishop
Keywords: timezone,tzinfo,datetime,olson,time
Platform: Independant
Classifier: Development Status :: 6 - Mature
Classifier: Intended Audience :: Developers
Classifier: License :: OSI Approved :: MIT License
Classifier: Natural Language :: English
Classifier: Operating System :: OS Independent
Classifier: Programming Language :: Python
Classifier: Topic :: Software Development :: Libraries :: Python Modules