/usr/lib/python2.6/site-packages/cloudinit/distros
Edit: /usr/lib/python2.6/site-packages/cloudinit/distros/net_util.py (5488B)
# vi: ts=4 expandtab
#
# Copyright (C) 2012 Canonical Ltd.
# Copyright (C) 2012, 2013 Hewlett-Packard Development Company, L.P.
# Copyright (C) 2012 Yahoo! Inc.
#
# Author: Scott Moser
# Author: Juerg Haefliger
# Author: Joshua Harlow
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 3, as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# This is a util function to translate debian based distro interface blobs as
# given in /etc/network/interfaces to an *somewhat* agnostic format for
# distributions that use other formats.
#
# TODO(harlowja) remove when we have python-netcf active...
#
# The format is the following:
# {
# : {
# # All optional (if not existent in original format)
# "netmask": ,
# "broadcast": ,
# "gateway": ,
# "address": ,
# "bootproto": "static"|"dhcp",
# "dns-search": ,
# "hwaddress": ,
# "auto": True (or non-existent),
# "dns-nameservers": [, ...],
# }
# }
#
# Things to note, comments are removed, if a ubuntu/debian interface is
# marked as auto then only then first segment (?) is retained, ie
# 'auto eth0 eth0:1' just marks eth0 as auto (not eth0:1).
#
# Example input:
#
# auto lo
# iface lo inet loopback
#
# auto eth0
# iface eth0 inet static
# address 10.0.0.1
# netmask 255.255.252.0
# broadcast 10.0.0.255
# gateway 10.0.0.2
# dns-nameservers 98.0.0.1 98.0.0.2
#
# Example output:
# {
# "lo": {
# "auto": true
# },
# "eth0": {
# "auto": true,
# "dns-nameservers": [
# "98.0.0.1",
# "98.0.0.2"
# ],
# "broadcast": "10.0.0.255",
# "netmask": "255.255.252.0",
# "bootproto": "static",
# "address": "10.0.0.1",
# "gateway": "10.0.0.2"
# }
# }
def translate_network(settings):
# Get the standard cmd, args from the ubuntu format
entries = []
for line in settings.splitlines():
line = line.strip()
if not line or line.startswith("#"):
continue
split_up = line.split(None, 1)
if len(split_up) <= 1:
continue
entries.append(split_up)
# Figure out where each iface section is
ifaces = []
consume = {}
for (cmd, args) in entries:
if cmd == 'iface':
if consume:
ifaces.append(consume)
consume = {}
consume[cmd] = args
else:
consume[cmd] = args
# Check if anything left over to consume
absorb = False
for (cmd, args) in consume.iteritems():
if cmd == 'iface':
absorb = True
if absorb:
ifaces.append(consume)
# Now translate
real_ifaces = {}
for info in ifaces:
if 'iface' not in info:
continue
iface_details = info['iface'].split(None)
dev_name = None
if len(iface_details) >= 1:
dev = iface_details[0].strip().lower()
if dev:
dev_name = dev
if not dev_name:
continue
iface_info = {}
if len(iface_details) >= 3:
proto_type = iface_details[2].strip().lower()
# Seems like this can be 'loopback' which we don't
# really care about
if proto_type in ['dhcp', 'static']:
iface_info['bootproto'] = proto_type
# These can just be copied over
for k in ['netmask', 'address', 'gateway', 'broadcast']:
if k in info:
val = info[k].strip().lower()
if val:
iface_info[k] = val
# Name server info provided??
if 'dns-nameservers' in info:
iface_info['dns-nameservers'] = info['dns-nameservers'].split()
# Name server search info provided??
if 'dns-search' in info:
iface_info['dns-search'] = info['dns-search'].split()
# Is any mac address spoofing going on??
if 'hwaddress' in info:
hw_info = info['hwaddress'].lower().strip()
hw_split = hw_info.split(None, 1)
if len(hw_split) == 2 and hw_split[0].startswith('ether'):
hw_addr = hw_split[1]
if hw_addr:
iface_info['hwaddress'] = hw_addr
real_ifaces[dev_name] = iface_info
# Check for those that should be started on boot via 'auto'
for (cmd, args) in entries:
if cmd == 'auto':
# Seems like auto can be like 'auto eth0 eth0:1' so just get the
# first part out as the device name
args = args.split(None)
if not args:
continue
dev_name = args[0].strip().lower()
if dev_name in real_ifaces:
real_ifaces[dev_name]['auto'] = True
return real_ifaces